|
|
|
|
Seibon TS Style Carbon Fiber Hood For 2000 - 2005 Dodge Neon
Seibon carbon fiber hoods offer the best in quality, style, and durability. Made with premium grade carbon fiber, Seibon hoods provide maximum durability and a show quality finish. Each hood is made using a vacuum infused manufacturing process for optimum strength and a consistent epoxy density for the entire surface of the hood. Vacuum Infused carbon fiber hoods are also up to 20% lighter than their similar hand-laid counterparts. Seibon carbon fiber hoods also feature a UV protectant clear coat that provides a long lasting, high gloss finish. For added durability, Seibon hoods have an integrated one piece underside shell for improved structural integrity. Seibon hoods are ready for installation using your factory hardware, hinges, and latch.
- Direct Bolt-on Hood
- 100% Real Premium Grade-A Carbon Fiber
- High Gloss Finish With UV Protectant Clear Coat
- Black Painted Underside
- Vacuum Infused Manufacturing Process
Seibon carbon fiber hoods are designed for aggressive styling and improved weight reduction. Each hood comes with a high gloss finish and UV protectant clear coat to preserve and protect for years to come. Painting is not required but can be done if desired. Quality, durability, and style have made Seibon custom carbon fiber hoods a must have for all performance enthusiasts.
Product Application Chart
MAKE | MODEL | TRIM | | | | 2000 | Dodge | Neon | 2001 | Dodge | Neon | 2002 | Dodge | Neon | 2003 | Dodge | Neon | 2004 | Dodge | Neon | 2005 | Dodge | Neon |
IncludesThis Seibon carbon fiber hood includes the hood only. Your factory hardware, hinges, and latch will be needed for installation.
Product Notes Professional installation recommended.
Damage Insurance Policy Damage Insurance is included on the hood during shipping, but only to your door. After you accept and sign for the package, there is no damage insurance. Please be sure to carefully inspect the hood for damages before accepting delivery. If the hood is damaged, refuse the shipment and sign "damaged" on the signature area of the shipping receipt.
HD0305DGNESRT4-TS
2000 - 2005 Dodge Neon TS Style Carbon Fiber Hood - Seibon
Ships From: Manufacturer - Seibon Carbon
Shipping Method: Ground Freight Shipping - Signature Requested For Delivery
Installation Notes: Replacement body panels should always be installed by a certified autobody shop. Typical installation procedures may include - but not limited too:
- Installing your factory hardware, hinges and latch from your original hood to the new hood.
- Adjusting the latch assembly, hinges, supports, and surrounding body panels for proper fitment.
- Installing hood pins for additional safety and proper installation (required).
- Installing a heat shield or insulation pad (required).
- Removing factory hood struts/shocks (if applicable) to prevent bending, warping, cracks or other damages.
- Sanding, priming, painting, clear coating, and polishing.
- Installation procedures may vary, professional installation recommended.
- Always be sure to test fit your parts before modifying them. Modifying your parts may void the manufacturers warranty.
California Proposition 65 Warning WARNING: This product may contain chemicals and/or compounds known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Manufacturer:
Seibon Carbon
Manufacturer Part Number:
HD0305DGNESRT4-TS
Product Category:
Dodge Neon Hood
|
|
|
|
|
|
|